A model of every roof plane, drawn from above and in 3D
The size of the roof and how steep each part is
The lengths of the ridges, valleys and edges your roofer orders by
A material estimate your roofer uses to order
Where each figure came from and what to check on site
What your roofer will check on site
How many layers of roofing are on the house, and the state of the decking underneath.
Flashing around the chimney and skylights, and where lower roofs meet walls.
Vents, pipe boots and attic ventilation.
Gutters, fascia and soffit, which a roof replacement usually leaves out.
This is the homeowner report. The plane-by-plane table, the line-length totals, the material takeoff and the measurement wireframe belong to the contractor report and are not part of this document (05 §3.1).
The contractor’s logo and colours appear here when configured; the company name is shown until then.
