All sample reportsSample property Viewed from the south-west. Facades are filled by material; roofs in grey. Roofs are drawn in grey for context. Fills show material zones; marks match the opening schedule.
Roofs are drawn in grey for context. Fills show material zones; marks match the opening schedule.
Roofs are drawn in grey for context. Fills show material zones; marks match the opening schedule.
Roofs are drawn in grey for context. Fills show material zones; marks match the opening schedule.
Wall and Siding Report
Facade areas by elevation, openings, net siding area, trim and a siding bill of materials.
4100 Example Ridge Drive, Plano, TX 75024 (synthetic). Made-up example data, not a measurement of a real home.
RoofKarmaWall and Siding Report
Wall and siding report
Wall and Siding Report
4100 Example Ridge Drive, Plano, TX 75024
- Gross wall area
- 5,675 sq ft
- Openings deducted
- 525 sq ft
- 32 verified openings
- Net area, verified facades
- 3,386 sq ft
- 18 of 21 facades
- Facades
- 21
- Complete + standard report
Cladding (gross area)
- Brick veneer1,024 sq ft
- Fiber-cement lap siding4,444 sq ft
- Board-and-batten207 sq ft
- Windows
- Doors and garage doors
RoofKarmaWall and Siding Report
Elevations
Front elevation
4100 Example Ridge Drive, Plano, TX 75024
- Gross area
- 1,872 sq ft
- Openings
- 351 sq ft
- Net area
- 1,521 sq ft
- Facades
- 7
- Brick veneer
- Fiber-cement lap siding
- Board-and-batten
- Window
- Door
Front elevation facades
| Facade | Wall | Width | Eave | Peak | Gross sq ft | Openings | Net sq ft |
|---|---|---|---|---|---|---|---|
| F1 | Garage, south wall | 36' 1" | 9' 10" | — | 355 | 2 · 126 | 229 |
| F2 | Main, south wall | 19' 8" | 19' 8" | — | 301 | 3 · 35 | 267 |
| F3 | Dormer west, south wall | 6' 7" | 23' 11" | 26' 2" | 29 | 1 · 8 | 21 |
| F4 | Front bay, south wall | 19' 8" | 19' 8" | 27' 1" | 460 | 3 · 79 | 381 |
| F5 | Dormer east, south wall | 6' 7" | 23' 11" | 26' 2" | 29 | 1 · 8 | 21 |
| F6 | Main, south wall | 19' 8" | 19' 8" | — | 388 | 4 · 67 | 321 |
| F7 | East wing, south wall | 26' 3" | 11' 10" | — | 310 | 2 · 30 | 280 |
| Total | 7 facades | 1,872 | 351 | 1,521 |
Heights are above the ground datum; widths run along each wall. Facades set back behind others are drawn where they show and are listed in full above.
RoofKarmaWall and Siding Report
Elevations
Rear elevation
4100 Example Ridge Drive, Plano, TX 75024
- Gross area
- 1,763 sq ft
- Openings
- Not verified
- Net area withheld
- Gross only
- Facades
- 3
- Brick veneer
- Fiber-cement lap siding
Rear elevation facades
| Facade | Wall | Width | Eave | Peak | Gross sq ft | Openings | Net sq ft |
|---|---|---|---|---|---|---|---|
| F8 | East wing, north wall | 26' 3" | 11' 10" | — | 310 | Not verified | Gross only |
| F9 | Main, north wall | 59' 1" | 19' 8" | — | 1,163 | Not verified | Gross only |
| F10 | Garage, north wall | 29' 6" | 9' 10" | — | 291 | Not verified | Gross only |
| Total | 3 facades | 1,763 | Not verified | Gross only |
Heights are above the ground datum; widths run along each wall. Facades set back behind others are drawn where they show and are listed in full above.
RoofKarmaWall and Siding Report
Elevations
Left elevation
4100 Example Ridge Drive, Plano, TX 75024
- Gross area
- 1,063 sq ft
- Openings
- 106 sq ft
- Net area
- 957 sq ft
- Facades
- 5
- Brick veneer
- Fiber-cement lap siding
- Board-and-batten
- Window
- Door
Left elevation facades
| Facade | Wall | Width | Eave | Peak | Gross sq ft | Openings | Net sq ft |
|---|---|---|---|---|---|---|---|
| F11 | Main, west wall | 39' 4" | 19' 8" | — | 451 | 5 · 59 | 392 |
| F12 | Garage, west wall | 29' 6" | 9' 10" | 17' 3" | 400 | 2 · 29 | 371 |
| F13 | Dormer west, west wall | 5' 8" | 23' 11" | — | 9 | 0 · 0 | 9 |
| F14 | Dormer east, west wall | 5' 8" | 23' 11" | — | 9 | 0 · 0 | 9 |
| F15 | Front bay, west wall | 9' 10" | 19' 8" | — | 194 | 2 · 18 | 176 |
| Total | 5 facades | 1,063 | 106 | 957 |
Heights are above the ground datum; widths run along each wall. Facades set back behind others are drawn where they show and are listed in full above.
RoofKarmaWall and Siding Report
Elevations
Right elevation
4100 Example Ridge Drive, Plano, TX 75024
- Gross area
- 977 sq ft
- Openings
- 68 sq ft
- Net area
- 909 sq ft
- Facades
- 6
- Brick veneer
- Fiber-cement lap siding
- Board-and-batten
- Window
Right elevation facades
| Facade | Wall | Width | Eave | Peak | Gross sq ft | Openings | Net sq ft |
|---|---|---|---|---|---|---|---|
| F16 | Front bay, east wall | 9' 10" | 19' 8" | — | 194 | 2 · 14 | 180 |
| F17 | Garage, east wall | 6' 7" | 9' 10" | 13' 1" | 75 | 0 · 0 | 75 |
| F18 | Dormer east, east wall | 5' 8" | 23' 11" | — | 9 | 0 · 0 | 9 |
| F19 | Dormer west, east wall | 5' 8" | 23' 11" | — | 9 | 0 · 0 | 9 |
| F20 | East wing, east wall | 26' 3" | 11' 10" | — | 310 | 2 · 24 | 286 |
| F21 | Main, east wall | 39' 4" | 19' 8" | — | 379 | 3 · 30 | 349 |
| Total | 6 facades | 977 | 68 | 909 |
Heights are above the ground datum; widths run along each wall. Facades set back behind others are drawn where they show and are listed in full above.
RoofKarmaWall and Siding Report
Openings
Opening schedule
4100 Example Ridge Drive, Plano, TX 75024
32 openings on 13 facades
| Mark | Facade | Type | Width × height | Area sq ft | Trim | Trim run | Status |
|---|---|---|---|---|---|---|---|
| G1 | F1 · Front | Garage door | 9' 0" × 7' 0" | 63.0 | Casing | 23' 7" | Deducted |
| G2 | F1 · Front | Garage door | 9' 0" × 7' 0" | 63.0 | Casing | 23' 7" | Deducted |
| W1 | F2 · Front | Window | 2' 6" × 3' 0" | 7.5 | Casing | 12' 2" | Deducted |
| W2 | F2 · Front | Window | 3' 0" × 5' 0" | 15.0 | Casing | 17' 2" | Deducted |
| W3 | F2 · Front | Window | 3' 0" × 4' 0" | 12.0 | Casing | 15' 2" | Deducted |
| W4 | F3 · Front | Window | 2' 6" × 3' 0" | 7.5 | J-channel | 11' 0" | Deducted |
| W5 | F4 · Front | Window, arched | 6' 0" × 8' 0" | 44.1 | Casing | 26' 7" | Deducted |
| W6 | F4 · Front | Window | 6' 0" × 5' 0" | 30.0 | Casing | 23' 2" | Deducted |
| W7 | F4 · Front | Window, arched | 2' 0" × 2' 6" | 4.6 | Casing | 9' 4" | Deducted |
| W8 | F5 · Front | Window | 2' 6" × 3' 0" | 7.5 | J-channel | 11' 0" | Deducted |
| D1 | F6 · Front | Door | 3' 6" × 8' 0" | 28.0 | Casing | 20' 1" | Deducted |
| W9 | F6 · Front | Window | 3' 0" × 4' 0" | 12.0 | Casing | 15' 2" | Deducted |
| W10 | F6 · Front | Window | 3' 0" × 5' 0" | 15.0 | Casing | 17' 2" | Deducted |
| W11 | F6 · Front | Window | 3' 0" × 4' 0" | 12.0 | Casing | 15' 2" | Deducted |
| W12 | F7 · Front | Window | 3' 0" × 5' 0" | 15.0 | Casing | 17' 2" | Deducted |
| W13 | F7 · Front | Window | 3' 0" × 5' 0" | 15.0 | Casing | 17' 2" | Deducted |
| W14 | F11 · Left | Window | 3' 0" × 5' 0" | 15.0 | Casing | 17' 2" | Deducted |
| W15 | F11 · Left | Window | 3' 0" × 4' 0" | 12.0 | Casing | 15' 2" | Deducted |
| W16 | F11 · Left | Window | 3' 0" × 5' 0" | 15.0 | Casing | 17' 2" | Deducted |
| W17 | F11 · Left | Window | 3' 0" × 4' 0" | 12.0 | Casing | 15' 2" | Deducted |
| W18 | F11 · Left | Window | 2' 6" × 2' 0" | 5.0 | Casing | 10' 2" | Deducted |
| D2 | F12 · Left | Door | 3' 0" × 6' 8" | 20.0 | Casing | 16' 11" | Deducted |
| W19 | F12 · Left | Window | 3' 0" × 3' 0" | 9.0 | Casing | 13' 2" | Deducted |
| W20 | F15 · Left | Window | 2' 0" × 5' 0" | 10.0 | Casing | 15' 2" | Deducted |
| W21 | F15 · Left | Window | 2' 0" × 4' 0" | 8.0 | Casing | 13' 2" | Deducted |
| W22 | F16 · Right | Window | 2' 0" × 4' 0" | 8.0 | Casing | 13' 2" | Deducted |
| W23 | F16 · Right | Window | 2' 0" × 3' 0" | 6.0 | Casing | 11' 2" | Deducted |
| W24 | F20 · Right | Window | 3' 0" × 4' 0" | 12.0 | Casing | 15' 2" | Deducted |
| W25 | F20 · Right | Window | 3' 0" × 4' 0" | 12.0 | Casing | 15' 2" | Deducted |
| W26 | F21 · Right | Window | 2' 6" × 4' 0" | 10.0 | Casing | 14' 2" | Deducted |
| W27 | F21 · Right | Window | 2' 6" × 4' 0" | 10.0 | Casing | 14' 2" | Deducted |
| W28 | F21 · Right | Window | 2' 6" × 4' 0" | 10.0 | Casing | 14' 2" | Deducted |
| Total | 32 deducted | 525.2 |
Areas are true areas: arched heads are circular segments, not width × height. Trim run is the treatment’s own perimeter (casing heads and sills run past the jambs; doors take no sill).
No opening was rejected: every entry lies inside its facade and none overlaps another.
RoofKarmaWall and Siding Report
Facades and materials
Facade and material summary
4100 Example Ridge Drive, Plano, TX 75024
- Gross wall area
- 5,675 sq ft
- Openings deducted
- 525 sq ft
- 32 verified openings
- Net area, verified facades
- 3,386 sq ft
- 18 of 21 facades
- Facades
- 21
- Complete + standard report
Cladding by material (sq ft)
| Cladding | Gross | Openings | Net (verified) | Gross, not verified | Quantity basis | Basis |
|---|---|---|---|---|---|---|
| Brick veneer | 1,024 | 77 | 603 | 344 | 947 | Net + gross |
| Fiber-cement lap siding | 4,444 | 444 | 2,582 | 1,419 | 4,000 | Net + gross |
| Board-and-batten | 207 | 5 | 202 | — | 202 | Net |
| All cladding | 5,675 | 525 | 3,386 | 1,763 | 5,150 |
Corners from facade adjacency
- Outside (convex) corners
- 15 corners · 171' 4" total height
- Inside (concave) corners
- 6 corners · 85' 11" total height
Facade registry: 21 facades
| Facade | Elevation | Wall | Width | Gross sq ft | Openings | Net sq ft |
|---|---|---|---|---|---|---|
| F1 | Front | Garage, south wall | 36' 1" | 355 | 126 | 229 |
| F2 | Front | Main, south wall | 19' 8" | 301 | 35 | 267 |
| F3 | Front | Dormer west, south wall | 6' 7" | 29 | 8 | 21 |
| F4 | Front | Front bay, south wall | 19' 8" | 460 | 79 | 381 |
| F5 | Front | Dormer east, south wall | 6' 7" | 29 | 8 | 21 |
| F6 | Front | Main, south wall | 19' 8" | 388 | 67 | 321 |
| F7 | Front | East wing, south wall | 26' 3" | 310 | 30 | 280 |
| F8 | Rear | East wing, north wall | 26' 3" | 310 | Not verified | Gross only |
| F9 | Rear | Main, north wall | 59' 1" | 1,163 | Not verified | Gross only |
| F10 | Rear | Garage, north wall | 29' 6" | 291 | Not verified | Gross only |
| F11 | Left | Main, west wall | 39' 4" | 451 | 59 | 392 |
| F12 | Left | Garage, west wall | 29' 6" | 400 | 29 | 371 |
| F13 | Left | Dormer west, west wall | 5' 8" | 9 | 0 | 9 |
| F14 | Left | Dormer east, west wall | 5' 8" | 9 | 0 | 9 |
| F15 | Left | Front bay, west wall | 9' 10" | 194 | 18 | 176 |
| F16 | Right | Front bay, east wall | 9' 10" | 194 | 14 | 180 |
| F17 | Right | Garage, east wall | 6' 7" | 75 | 0 | 75 |
| F18 | Right | Dormer east, east wall | 5' 8" | 9 | 0 | 9 |
| F19 | Right | Dormer west, east wall | 5' 8" | 9 | 0 | 9 |
| F20 | Right | East wing, east wall | 26' 3" | 310 | 24 | 286 |
| F21 | Right | Main, east wall | 39' 4" | 379 | 30 | 349 |
Gross 5,675 sq ft = the sum of every facade. Net = gross − verified openings, facade by facade, never below zero.
Openings on the rear elevation are not verified, so 3 facades stay gross and no whole-building net area is stated.
RoofKarmaWall and Siding Report
Bill of materials
Siding bill of materials
4100 Example Ridge Drive, Plano, TX 75024
- Gross wall area
- 5,675 sq ft
- Openings deducted
- 525 sq ft
- 32 verified openings
- Net area, verified facades
- 3,386 sq ft
- 18 of 21 facades
- Facades
- 21
- Complete + standard report
Brick veneer — net where verified + gross where not
| Item | Unit | Waste 0% | RecommendedWaste 5% | Waste 10% | Waste 15% | Waste 20% |
|---|---|---|---|---|---|---|
| Area incl. waste | sq ft | 947 | 994 | 1,042 | 1,089 | 1,137 |
| Modular brick, 3/8 in joints (6.75 per sq ft) | units | 6,394 | 6,713 | 7,033 | 7,353 | 7,672 |
Masonry units are cut at openings and corners; 5% is the default. Basis: 603 sq ft net + 344 sq ft gross where openings are not verified.
Fiber-cement lap siding — net where verified + gross where not
| Item | Unit | Waste 0% | Waste 5% | Waste 10% | RecommendedWaste 15% | Waste 20% |
|---|---|---|---|---|---|---|
| Area incl. waste | sq ft | 4,000 | 4,200 | 4,400 | 4,600 | 4,800 |
| Lap siding plank, 7 in exposure, 12 ft | pieces | 572 | 601 | 629 | 658 | 686 |
| Siding squares (100 sq ft) | squares | 40.00 | 42.00 | 44.00 | 46.00 | 48.00 |
18% of this cladding is in gables or walls above roofs, where every course is cut at an angle; 15% is recommended above the 15% threshold. Basis: 2,582 sq ft net + 1,419 sq ft gross where openings are not verified.
Board-and-batten — net area (openings deducted)
| Item | Unit | Waste 0% | Waste 5% | Waste 10% | RecommendedWaste 15% | Waste 20% |
|---|---|---|---|---|---|---|
| Area incl. waste | sq ft | 202 | 212 | 222 | 233 | 243 |
| Vertical panel, 4 × 8 ft | sheets | 7 | 7 | 7 | 8 | 8 |
| Battens at 16 in o.c., 12 ft | pieces | 13 | 14 | 14 | 15 | 16 |
Panels are cut to gable slopes and batten layout; 15% is the default. Basis: 202 sq ft net.
Where openings are not verified, field quantities are computed on gross area and say so; they are never net.
Openings are deducted once each: the registry refuses overlapping or duplicate openings, and net area never falls below zero.
Waste applies to field cladding only; trim, flashing and barrier carry their own cut or lap allowance.
RoofKarmaWall and Siding Report
Bill of materials
Trim and accessories
4100 Example Ridge Drive, Plano, TX 75024
- Gross wall area
- 5,675 sq ft
- Openings deducted
- 525 sq ft
- 32 verified openings
- Net area, verified facades
- 3,386 sq ft
- 18 of 21 facades
- Facades
- 21
- Complete + standard report
Trim, flashing, barrier and fasteners
| Item | Qty | Unit | Measured basis | Allowance | Status |
|---|---|---|---|---|---|
| Starter strip, 12 ft | 27 | pieces | 305' 11" | 5% | Complete |
| Outside corner trim, 10 ft | 20 | pieces | 141' 4" | 0% | Complete |
| Inside corner trim, 10 ft | 9 | pieces | 67' 11" | 0% | Complete |
| Trim board (casing), 12 ft | 45 | pieces | 483' 1" | 10% | Verified walls only |
| J-channel at openings, 12.5 ft | 2 | pieces | 22' 0" | 10% | Verified walls only |
| Head flashing (drip cap), 10 ft | 32 | pieces | 132' 3" | 0% | Verified walls only |
| Opening flashing tape, 75 ft roll | 7 | rolls | 472' 5" | 10% | Verified walls only |
| Roof-line J-channel, 12.5 ft | 9 | pieces | 101' 0" | 10% | Complete |
| Band board at gable line, 12 ft | 7 | pieces | 68' 11" | 10% | Complete |
| Wainscot cap flashing, 10 ft | 32 | pieces | 286' 2" | 10% | Complete |
| Weather-resistive barrier, 9 × 150 ft roll | 5 | rolls | 5,675 sq ft | 15% | Complete |
| Siding nails, box of 1,000 | 8 | boxes | 7,300 each | 0% | Complete |
How each line is derived
- Starter strip, 12 ft: 305' 11" of lap-siding bottom edges (wainscot top, ground and level roof lines) less verified openings.
- Outside corner trim, 10 ft: 15 outside corners, 141' 4" of corner height above masonry; each corner from whole pieces.
- Inside corner trim, 10 ft: 6 inside corners, 67' 11" of corner height above masonry; each corner from whole pieces.
- Trim board (casing), 12 ft: 483' 1" around 30 cased openings: heads and sills run past the jambs by the casing width.
- J-channel at openings, 12.5 ft: 22' 0" around 2 openings finished with J-channel.
- Head flashing (drip cap), 10 ft: One head per opening, 132' 3" in all; arched heads by arc length.
- Opening flashing tape, 75 ft roll: 472' 5" of opening perimeter (heads, jambs, window sills).
- Roof-line J-channel, 12.5 ft: 101' 0" of wall bottom edges on lower roofs (true length, sloped and level).
- Band board at gable line, 12 ft: 68' 11" of level change from lap siding to gable cladding.
- Wainscot cap flashing, 10 ft: 286' 2" along the top of the masonry wainscot, less openings that interrupt it.
- Weather-resistive barrier, 9 × 150 ft roll: 5,675 sq ft gross wall area (openings not deducted) plus 15% laps.
- Siding nails, box of 1,000: 7,300 nails for 46.00 squares of lap siding and 8 panels at the recommended waste; confirm against the product's fastening schedule.
Opening trim, head flashing and tape for the rear elevation (F8, F9, F10) are not included: openings there are not verified.
Roof-line J-channel only: step and headwall flashing on those roof lines belong to the roof report.
RoofKarmaWall and Siding Report
Sources and limitations
Evidence, checks and assumptions
4100 Example Ridge Drive, Plano, TX 75024
This report
- Report
- RK-2026-0925-S4R1-R9 · v1
- Generated
- Sep 25, 2026
- Evidence date
- Mar 1, 2026
- Geometry
- RoofKarma synthetic massing model (roof-build v1)
- Calculation
- wall-takeoff-v1 · siding-profile-v1
- Template
- report-book@1 · R9
- Facade evidence: Synthetic elevation drawings made for this sample — no photographs, no site visit
- Height datum: Top of slab at the front door, taken as level around the house
- Facades: facade-model v1 from the same massing, invented openings
Openings by elevation
| Elevation | Facades | Openings | Status |
|---|---|---|---|
| Front elevation | 7 | 16 | Verified — net area |
| Rear elevation | 3 | Unknown | Not verified — gross only |
| Left elevation | 5 | 9 | Verified — net area |
| Right elevation | 6 | 7 | Verified — net area |
Automated checks
| Check | Result | Detail |
|---|---|---|
| Material zones cover each facade once | Passed | Zone areas add up to every facade’s gross area. |
| Openings lie inside their walls | Passed | Every opening fits inside a visible part of its wall. |
| No opening deducted twice | Passed | No overlapping or duplicate openings; each is deducted once. |
| Net never below zero | Passed | Net = gross − the union of verified openings, facade by facade. |
| Gross never called net | Note | 3 facades are reported gross only; their quantities say so. |
| Corners from shared wall ends | Passed | 21 corners; every wall end meets another facade. |
| Arched heads measured as arcs | Note | 2 arched openings: area as a circular segment, head trim along the arc. |
Estimating assumptions
- Lap siding: 7 in exposure on 12 ft pieces (7 sq ft each).
- Panels 4 × 8 ft; battens 16 in on centre, 12 ft pieces.
- Masonry: 6.75 modular units per sq ft; masonry corners are not trimmed.
- Barrier from gross wall area with 15% laps; tape from opening perimeters.
- Corner trim cut per corner from whole 10 ft pieces.
- Casing 3.5 in wide; head flashing laps 1 in past the trim each side.
- RoofKarma default wall estimating profile (siding-profile-v1); wall-takeoff-v1.
Limitations
- Every figure comes from an invented house and invented facade drawings; it is not a surveyed property.
- Wall heights here are the sample massing model’s eave lines. A real wall report takes heights from calibrated elevations, photogrammetry or field measurement — never from an assumed height extruded under a roof.
- Soffit and fascia, wall thickness, sheathing and other concealed layers are not measured and not included.
- Wall code and climate requirements are not assessed in this report.
- No accuracy or certification is claimed; confirm quantities on site before ordering.